User’s Manual

2024/10 (v2.1)

Body Camera DrivePro Body 40

1. Package Contents

DrivePro Body 40	USB Type-C to Type-C cable
USB Type-C to Type-A cable	360° rotatable clip & Velcro holder
	Note: When removing the DrivePro Body from the holder, please pull from the left and to the right side. When reassembling, ensure the DrivePro Body is securely attached to the holder.

2. Getting Started

2-1 Function Buttons

2-2 Function Buttons Description

Button	Instruction	Description
Power Button	Long press once	Power on/off.
	Short press twice	Switch between Buffering mode and Recording mode. (Default: Buffering mode)
Snapshot Button	Long press once	Turn on/off Infrared LEDs. Note: By default, long-pressing the Snapshot button enables or disables the infrared LEDs. You can change this setting using the DrivePro Body Toolbox to control the audio recording function instead.
	Short press once	Take a snapshot.
Power Button ＋ Snapshot Button	Press and hold for over 5 seconds	Reset, format and power off the device. Note: This function is disabled by default and can be enabled using the DrivePro Body Toolbox. Warning: All data will be permanently erased.
Status Button	Press for 5 seconds	Pair and connect to Bluetooth.
	Short press once	Check the battery and recording status.
Assistive Button	Long press once	Turn on/off the light indicators, buzzer, and vibrator (Stealth Mode)
	Short press twice	Turn on/off the microphone (Silent Mode)

2-3 LED Indicators

Recording

LED	Status	Definition
	Flashing	Low battery

Connected to a computer / power source

LED	Status	Definition
	Solid	Charging

Checking the battery status

LED	Status	Definition
	Solid	> 67% remaining
	Solid	31% to 67% remaining
	Solid	< 31% remaining

Powering on

LED	Status	Definition
	Solid	Initializing

Recording

LED	Status	Definition
	Flashing	Memory almost full
	Flashing quickly	Bluetooth pairing
	Flashing	GPS positioning
	Solid	Checking status in Buffering mode
	Flashing	Checking status in Recording mode
	Solid	Silent mode (Microphone off)

Connected to a computer

LED	Status	Definition
	Flashing	Transferring data

LED	Status	Definition
	Flashing	Powering on
	Solid	Buffering mode
	Flashing	Recording mode
	Solid	Browser / Connected to a computer

2-4 Charging the DrivePro Body

Before use, please ensure that the battery is fully charged. Charge the DrivePro Body via the adapter or by connecting the USB cable to the computer. A solid orange light of the battery indicator is visible while charging and will turn off when fully charged.

To charge the DrivePro Body, you can either:

• Connect the USB cable to the DrivePro Body 40 and a wall outlet using the 5V/2A adapter (Optional).
• Connect the USB cable to the DrivePro Body 40 and a computer.
• Connect the DrivePro Body to Transcend’s Docking Station (Optional).

3. Recording Videos

3-1 Buffering Mode

Recording in Buffering mode can greatly save storage space as the files are not recorded to the internal storage.

To power on and start Buffering mode, long press the Power button; you will hear a beep. The recording indicator will flash blue when powering on and then turn solid in Buffering mode. To stop recording and power off, long press the Power button; you will hear a beep. The LED light and the device will turn off.

To switch between Buffering and Recording modes, double-press the Power button. You will hear two beeps.

3-2 Recording Mode

When an incident occurs, switch to Recording mode. The recorded file, along with up to 2 minutes of footage prior to the incident, will then be stored in internal memory.

To start Recording mode, double-press the Power button while DrivePro Body 40 is in Buffering mode; you will hear 2 beeps, and the recording indicator will flash red. To stop recording, long press the Power button again. After hearing a beep, the LED light and the device will turn off.

Video files recorded in Recording mode are saved in the “VIDEO” folder and will be overwritten with loop recording enabled.

DrivePro Body 40 saves video files every 3 minutes automatically. (The default recording length is 3 minutes.)

3-3 Recording Videos with Infrared LEDs

At night or in low light conditions, DrivePro Body 40 will automatically activate the Infrared LED mode; the four Infrared LEDs will light up. You can also long-press the Snapshot button to turn ON/OFF the Infrared LED mode manually. Please keep the DrivePro Body 40 at least 1 meter away from the object to avoid misinterpreting the light conditions due to short-range infrared reflection.

4. Taking Photos

Short press the Snapshot button to take photos while recording. A beep will indicate that the snapshot has been taken. Pictures will be saved in the “PHOTO” folder.

5. Audio Recording

To use this feature, you need to configure it through the DrivePro Body Toolbox. Change the setting for long-pressing the Snapshot button from enabling the Infrared LEDs to controlling the Audio Recording function. The audio files will be stored in the "AUDIO" folder.

6. Advanced Feature

6-1 Bluetooth Team Sync

"Bluetooth team sync" is a function based on Bluetooth technology. Within the Bluetooth range, when one body camera switches to Recording mode, other body cameras in the same team will also switch from Buffering mode to Recording mode. Additionally, the Bluetooth quick wakeup feature allows other cameras in the team to power on from an off state and start recording simultaneously.

7. Using the DrivePro Body App

The DrivePro Body App, developed for iOS and Android devices, allows you to watch live-view videos and adjust camera settings wirelessly on your smart devices.

7-1 Downloading and Installing the App

1. Search for DrivePro Body App from the App Store or Google Play.
2. Download and install the DrivePro Body App.

Once the installation is complete, the App will be displayed on the home screen of your device.

7-2 Connecting to the DrivePro Body App

1. Tap “DrivePro Body” App and turn on Bluetooth. Select DrivePro Body 40 on the App.


2. Power on the DrivePro Body by long pressing the Power button. Tap Next to continue.


3. Long press the Status button until you hear a beep. Tap Connect on the App to connect to Bluetooth. After hearing three beeps, you can take snapshots, switch recording modes, or adjust settings via the App.


4. Tap Browser or Live View to connect to Wi-Fi named “DPB40_XXXXXX” with the default password “12345678”.

7-3 DrivePro Body App Home

7-4 Playing Videos and Browsing Photos

1. To play videos and browse photos, tap Browser on the Homepage, or tap on the top left corner first, then tap .

2. Tap the icons at the bottom to play recorded videos or browse photos.

While playing a video, you can trim and download the desired segment (10s, 20s, or 30s) without downloading the entire clip to your phone for editing. See Trim Video.

7-5 Settings

Tap on the top left corner first, then tap to enter the Settings menu.
In the Settings menu, you can adjust the video, device, Wi-Fi, and system settings.

Menu options

VIDEO
Icon	Function	Description / Options
	Resolution	Set the video recording resolution and quality, and enable or disable image stabilization. Note: • When image stabilization is enabled, the available resolution options are 1440P/30FPS and 1080P/30FPS. • When Auto mode is enabled, the following settings are applied: Recording mode (cannot switch to Buffering mode), video length (3 mins), and resolution (1440P/30FPS). These settings are retained even if Auto mode is turned off. • Auto mode automatically turns the image stabilization on or off depending on the environment, with changes taking effect from the next recording. • The size of the recording area varies with the resolution.
		1440P/60FPS / 1440P/30FPS / 1080P/30FPS / 1080P/30FPS (Power Saving) / 720P/30FPS / 720P/30FPS (Power Saving)
	Video Length	Set the recording length of each recorded video.
		3 min / 5 min / 10 min
	Microphone	Turn off/on the microphone during video recording.
		Disable / Enable
	Loop Recording	Overwrite the old video files with new ones.
		Disable (default) / Enable
	Light Frequency	Select the appropriate frequency to avoid flashing A/C light.
		50 Hz / 60 Hz
	Default Recording Mode	Select the default recording mode.
		Buffering mode / Recording mode
	Buffered Video Length	Set the buffered video length to record footage that happens prior to switching to Recording mode. Note: • The resolution settings determine the maximum length of videos recorded in Buffering mode. • When the resolution is set to 1440P/60FPS or 1440P/30FPS, the available options for Buffered Video Length are 30 s and 60 s.
		30 s / 60 s / 90 s / 120 s
VIDEO STAMP
Icon	Function	Description / Options
	Video Stamp	Display the video label, date/time, and watermark on photos or videos.
		Disable / Enable
	Video Label	Tap to edit the video label to be displayed. (The default label is DPB40_XXXXXX.)
	Date / Time	Select the date and time format.
		DATE FORMAT: Y/M/D / M/D/Y / D/M/Y TIME FORMAT: 24 HR / AM/PM
	Watermark	Display the Transcend logo watermark on photos or videos.
		Disable / Enable
DEVICE
Icon	Function	Description / Options
	Stealth Mode	Turn off/on the stealth mode. When the stealth mode is on, the light indicators, buzzer, and vibrator are disabled.
		Disable / Enable
	Infrared LED	Select to activate the Infrared LEDs manually or automatically.
		Manual / Auto
	Wi-Fi Password	Set the Wi-Fi password of the DrivePro Body 40. (Default password is 12345678) Note: We recommend changing the DrivePro Body's Wi-Fi password the first time you connect to the app.
SYSTEM
Icon	Function	Description / Options
	Time Synchronized	Sync the DrivePro Body time with your smart device.
	Firmware Upgrade	Tap to upgrade the firmware to the latest version.
	Siri Shortcuts	Add the app to Siri Shortcuts to quickly operate your DrivePro Body or check its power status. Learn more about using Siri to control your DrivePro Body.

7-6 Location History

When the DrivePro Body connects to the app, it records the latest timestamp and location, offering valuable information if the camera goes missing.

Learn how to check the connection location of your DrivePro Body ＞

7-7 Control Your DrivePro Body Using Siri

You can add the app to Siri Shortcuts to quickly start recording, capturing images, or checking DrivePro Body power status.

Ask Siri to control DrivePro Body ＞

8. Using the DrivePro Body Toolbox Software

DrivePro Body Toolbox is video file management software which simplifies the settings of the camera. The software features a user-friendly interface that allows users to set the basic functions of the DrivePro Body camera.

8-1 System Requirements

System requirements for connecting the DrivePro Body 40 to a computer and for using the DrivePro Body Toolbox:

A desktop or a laptop with a working USB port:

• Microsoft Windows 10 or later
• macOS 10.14 or later

Downloading and installing the DrivePro Body Toolbox:

1. Download the installation files from:
   https://www.transcend-info.com/support/software/drivepro-body-toolbox
   
2. Install DrivePro Body Toolbox on your desktop or laptop.

8-2 Status

On the Status page, the basic information of the DrivePro Body is displayed, including the user label, model, device serial number, and firmware version.

To adjust the user label and Bluetooth team sync function, click .

To find a device, click .

To play videos and browse photos, click .

To enter Webcam mode, click to use the device as a camera and microphone.

To start backing up, click .

8-3 Settings

On the Settings page, you can adjust the Device, Video, and Video Stamp settings.

Video Stamp
Function	Description / Options
Video Stamp	Display the video recording time and the video label.
	OFF / ON
Date Format	Set the date format.
	Y/M/D / M/D/Y / D/M/Y
Time Format	Select the 24-hour clock or the 12-hour clock.
	24HR / AM/PM
Watermark	Display the Transcend logo watermark on photos or videos.
	OFF / ON

8-4 Tools

On the Tools page, you can upgrade firmware to the latest version, format disk or reset DrivePro Body to its default status.

Tools
Function	Description / Options
Firmware Ver	Upgrade your firmware to the latest version available.
Password	Set a password to protect the drive of your body camera. Password should be between 8 to 16 characters, either letters or numbers.
Format Disk	Format your disk.
Reset Device	Reset all settings to default or erase all contents and settings.

8-5 File Manager

Once the data is backed up, you can search and manage your videos and photos on the File Manager page.

• Click to play the video on the screen.

• Click to enlarge the video to full screen and play it. With a GPS receiver, the paths can be displayed along with the recorded video.

• Click on the right side of the page to add, delete, or edit the Owner and Category.
  

• Click to classify the Owner and Category of the selected file.

8-6 Smart Detection

The DrivePro Body camera offers a feature that automatically detects faces in videos and extracts footage to the sidebar, allowing users to blur or block out faces. For setup instructions, please refer to the DrivePro Body Toolbox Manual.

8-7 Preference

Click on top of the page to adjust the settings of the DrivePro Body Toolbox. Check the available options below according to your preference.

Consult the DrivePro Body Toolbox Manual for further information ＞

9. Transferring Files to a Computer

To transfer files between the DrivePro Body and the computer:

1. Plug the USB cable into the connection socket of the DrivePro Body.
2. Connect the other end of the cable to the desktop or laptop.

Your DrivePro Body is now ready to transfer data like an external hard drive. To transfer files to the computer, copy them from the folder of the body camera.

10. Docking Station (Optional)

Transcend’s TS-DPD6C docking station is designed specifically for the DrivePro Body 40 and offers a complete charging, data upload, and camera management solution via the network. Users can charge multiple DrivePro Body 40 simultaneously and share files (including video recordings and snapshots) to an external storage device via a USB port.

For more information, please refer to the DPD6C User's Manual. ＞

11. Cautions

• Do not use or store the DrivePro Body in the following places to prevent malfunction or deformation:
• In extremely hot, cold or humid places such as in a car parked in the sun
• Under direct sunlight or near a heater
• Near strong magnetic fields
• In sandy or dusty places

• Please clean and protect the lens of the DrivePro Body frequently and carefully.
• Wipe the lens with a soft cloth in the following cases:
• When there are fingerprints on the lens
• When the lens is exposed to salty air, such as at the seaside
• Store in a ventilated place with little sand and dust.
• To prevent mold, periodically clean the lens.

• Cleaning
• Clean the DrivePro Body surface with a soft cloth slightly moistened with water, and wipe the surface with a dry cloth.
• Do not clean the camera with chemical products (e.g., thinner, benzine, alcohol, insect repellent, sunscreen or insecticide, etc.) and disposable cloths, as they may damage the finish or the casing.
• Do not touch the camera with any of the abovementioned chemicals on your hand.
• Do not leave the camera in contact with rubber or vinyl for long.

• Moisture condensation
• If the DrivePro Body is brought directly from a warm to a cold place (or on the contrary), moisture may condense inside or outside the camera to cause malfunction of the DrivePro Body.
• If moisture condensation occurs, turn off the DrivePro Body immediately and wait about 1 hour for the moisture to evaporate before using the device again.

• GPS receiver
• The performance and accuracy of the GPS system may vary with the environment.
• GPS signals cannot penetrate buildings and metallic tinted films. GPS data accuracy depends on the surroundings, including the weather and the location the DrivePro Body is used (e.g., high buildings, tunnels, bridges, and forests). For first-time use, please place the device in an outdoor open area for GPS positioning.

• Usage instructions for the bundled Velcro holder
• The bundled Velcro holders are suitable for use on raincoats, windcheaters, and other plastic surfaces. However, they are not recommended for cotton, wool, or leather use; otherwise, we suggest sewing them on.
• Each set of Velcro includes two sides. Adhere one side to the bundled Velcro holder and the other to the clothes.
• Application instructions: Ensure the clothes are clean and dry before attaching and using the device. Peel off the tape and firmly press it into place. Leave it for 24 hours for optimal performance.

12. IP68 Protection

The camera body of the DrivePro Body 40 is rated at IP68, offering splash, water, and dust resistance. However, splash, water, and dust resistance are not permanent conditions, which might decrease due to normal wear. The warranty does not cover liquid damage.

The limited warranty does not cover malfunctions or damage caused by improper use.

• Do not use the DrivePro Body 40 in water as it is not waterproof.
• Do not use the DrivePro Body 40 in high temperatures and humidity, such as saunas, steams, and shower rooms.
• Do not use the DrivePro Body 40 for long in heavy rains to prevent moisture from penetrating. Ensure the power cable, adapter, and connection socket are completely dry before charging.

13. Specifications

DrivePro Body 40
Dimensions	95.9 mm (L) × 52.2 mm (W) × 27.6 mm (H) 3.78” (L) × 2.06” (W) × 1.09” (H)
Weight	136 g (4.8 oz)
Connection Interface	Type-C (USB 2.0)
Wi-Fi Protocol	802.11n
Frequency	2.4 GHz
Storage	128GB internal memory
Lens	5-megapixel, F/2.0, 130° (diagonal)
Resolution / Frame Rate (Max.)	2K QHD (2560 x 1440) 60FPS
Video Format	MP4 (H.264)
Battery	Li-Polymer 3120 mAh
Battery Life (Max.)	11 hours Note: The actual video recording length may vary with environmental conditions.
Power Supply (Max.)	Input: DC5V / 2A
Operating Temperature	-20°C (-4°F) to 60°C (140°F) 10°C (50°F) to 40°C (104°F) when charging with the adapter
IP Rating	IP68
Certificate	CE / UKCA / FCC / BSMI / NCC / MIC / KC / EAC / RCM
Shock Resistance	MIL-STD-810G 516.6 – Transit Drop Test
Warranty	Two-year Limited Warranty
Note	The DrivePro Body 40 features image enhancement technologies such as Electric Image Stabilization (EIS), Wide Dynamic Range (WDR), High Dynamic Range (HDR), and High Frame Rate (HFR), supporting high-quality recording at 60FPS. Essential details can still be presented even in low, dim light.

14. Frequently Asked Questions

If you have issues using DrivePro Body, please refer to the following information to troubleshoot problems. If you cannot find any ideal solution to your questions, please consult the store where you purchased the product or the service center, or contact the local Transcend branch office.

You can also visit Transcend’s website for more FAQs and Technical Support services.
https://www.transcend-info.com/
https://www.transcend-info.com/Support/contact_form

• My computer operating system cannot detect my DrivePro Body.
  Please check the followings:
  
• Is your DrivePro Body properly connected to the USB port? If not, unplug and reconnect it. Ensure both USB cable ends are correctly connected, as shown in the User’s Manual.
• Is the computer’s USB ports enabled? If not, refer to the user’s manual of your computer (or motherboard) to enable them.

• None of the DrivePro Body buttons are responding.
• Please press the Reset button on the bottom of the DrivePro Body using a thin object with a flat tip, such as a straightened paper clip, to turn it off and on again.

• Is the DrivePro Body 40 shockproof and waterproof?
• The DrivePro Body 40 is IP68 dust and water protected and meets rigorous U.S. military drop-test standards *.
  * Based on MIL-STD-810G 516.6 – Transit Drop Test
  

• Can DrivePro Body 40 record while charging?
• To ensure recording while charging, it is crucial to utilize an external power supply that meets the specific requirements of the DrivePro Body 40, which is 5V/2A. This includes considering power banks as one of the viable options.

15. EU Compliance Statement

Transcend Information hereby declares that all CE marked Transcend products incorporating radio equipment functionality are in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:
https://www.transcend-info.com/eu_compliance

Dashcam / Body Camera series
Frequency: 2400 MHz to 2483.5 MHz	Maximum transmit power: < 100 mW

16. Recycling and Environmental Protection

For more information on recycling the product (WEEE) and battery disposal, please refer to the following link:
https://www.transcend-info.com/about/green

17. Warranty Policy

Please find the warranty period of this product on its package. For details of Warranty Terms and Conditions and Warranty Periods, please refer to the link below:
https://www.transcend-info.com/warranty

18. GNU General Public License (GPL) Disclosure

For more information on open-source licensing, please refer to the link below:
https://www.transcend-info.com/Legal/?no=10

19. End-User License Agreement (EULA)

For details of software license terms, please refer to the following link:
https://www.transcend-info.com/legal/gpl-disclosure-eula

20. Federal Communications Commission (FCC) Statement

This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation.

This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This equipment complies with the FCC portable RF exposure limit set forth for an uncontrolled environment. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.

This equipment could be installed and operated with minimum distance 0cm between the radiator & your body.

• Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.

• This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Transcend Information Inc (USA)
1645 North Brian Street, Orange, CA 92867, U.S.A
TEL: +1-714-921-2000

21. Eurasian Conformity Mark (EAC)